Warning! Never Use Nails or Unspecified Fasteners to Anchor the Safety Boot®!

Different Types of Subfloor Material Require Different Types of Fasteners In Order to Exceed the OH&S Guardrail Requirements.

Securing Safety Boot® to 2X4 Post

Each Safety Boot® must use:

1--Hex-Head Lag Screw, 3/8 x 2 inch; and
1--3/8 X 1-1/2 inch Fender Washer

Washers Provided with ALL Orders

Anchor into provided hole in sidewall of Safety Boot®.

Concrete Applications

4 - Masonry fasteners such as HILTI ® HUS-H 3/8 Inch Screw Anchors or similar anchors and;
4 - 3/8 X 1-1/2 Inch Fender Washers
Washers Provided with ALL Orders

Anchor using the four primary corner holes.

IMPORTANT: Due to the variances in concrete mixtures and applications (such as, concrete mixture type, psi strength, slab thickness, cure time, etc.), concrete fasteners used to secure the Safety Boot® MUST be evaluated on a case by case basis by a qualified competent person. They should verify that the selected fastener specifications for average ultimate pullout and shear values are in compliance with the OH&S required strength standards.* Most concrete fasteners are packaged to include a product specification chart that denotes the average ultimate pullout and shear values in concrete and/or hollow block application.